Products
Contact Us
- Contact Person : Mr. Liu Andy
- Company Name : Leetro Automation Co., Ltd.
- Tel : 86-28-85142599
- Fax : 86-28-85187774
- Address : Sichuan,Chengdu,Bldg. 8-B, Dayi Incubation Park, No. 1, Keyuan South 2nd Road, New and Hi-Tech Zone
- Country/Region : China
- Zip : 610041
Products List
4-axis Universal/general-purpose Motion Controller
* 4-axis with output frequency up to 2 MHz;
* 2-4 axes linear & 2-axis circular interpolation;
* Programmable T/S-profile.
* PCI-BUS * 1 to 4-axis card for stepper motors or digital servo motors * Pulse frequency from 0.02Hz to max 2MHz* Linear interpolation for multiple...
Genuine Leetro Laser Controler MPC6535
* 3-axis control with pulse frequency up to 7.5MHz
* USB and RS232 (MODbus) interface
* Uncapping protection
* Flying-optics
* Stand-alone* Pulse frequency up to 7.5MHz* 3-axis card for stepper motors or digital servo motors* RS232 applicable for mainstream industrial...
3-axis Motion Controller (MPC6515)
* 3-axis control with pulse frequency up to 2MHz;
* General controller for open-loop laser control system.
* Stand-Alone Motion Controller* Apply DSP and FPGA technologies* 3-axis card for stepper motors or digital servo motors * Trapezoidal or S-curve drive of slow-up/slow down...
Genuine laser control board MPC03-LH/LV/LX
* for laser engraving and cutting machine
* PC-based, PCI interface
* 3-axis motion control board
LaserCut software developed by Leetro Automation Co., Ltd. Can be applied to laser engraving and cutting system processing large-scale images based on MPC03-LHMain features of...
Laser Motion Controller with touch screen
* 3-axis control with pulse frequency up to 2MHz;
* General controller for open-loop laser system.
* Stand-Alone Motion Controller * Apply DSP and FPGA technologies * 3-axis card for stepper motors or digital servo motors * Trapezoidal or S-curve drive of slow-up/slow down...
Laser Machine Parts control board MPC6515
* 3-axis control with pulse frequency up to 7.5MHz;
* Dedicated controller for open-loop laser motion control
* Stand-Alone Motion Controller * Apply DSP and FPGA technologies * 3-axis card for stepper motors or digital servo motors * Trapezoidal or S-curve drive of slow-up/slow...
laser machine part control board MPC6535
* 3-axis controll with pulse frequency up to 7.5MHz;
* USB and RS232 interfaces;
* Uncapping protection;
* Flying-optics.
* Stand-Alone* Pulse frequency up to 7.5MHz* 3-axis card for stepper motors or digital servo motors* RS232 applicable for mainstream industrial touchscreen...
3-phase high-performance Hybrid Stepper/stepping Motor Driver/drive (DMDT68A)
* PWM Constant wave chopper;
* Up to 400KHz Pulse response frequency;
* TTL compatible input signal;
* Max current 6.8A/phase
Features- PWM Constant wave chopper.- Up to 400KHz Pulse response frequency.- TTL compatible input signal- 16-level currents, Max current...
DMD403A, 2-phase Hybrid Stepper Motor Drive
* 2-phase;
* Supply voltage to +40VDC, current to 3.5A;
* Microstep resolutions up to 51200 steps/rev;
* for 4, 6, or 8-lead.
Cost EffectiveSupply voltage to +40VDC, current to 3.5AInaudible 20khz chopping frequencyTTL compatible and optically isolated input signalsAutomatic...
2-phase Hybrid Stepper/stepper Motor Driver/drive (DMD403A)
* 2-phase
* Supply voltage to +40VDC, current to 3.5A
* Microstep resolutions up to 51200 steps/rev
* for 4/6/8 leads motor
High performance, low costSupply voltage to +40VDC, current to 3.5AInaudible 20khz chopping frequencyTTL compatible and optically isolated input...